Every time you want to access the settings on your router. However, changing the settings in a router is to access the device page on the local network. This is usually done by entering the local IP address in a browser and pressing the Enter key. Unfortunately, there is no “default IP” that all routers use. For this reason, if you forget or lose the IP address of your router, it can be very annoying when you want to change its settings. If you get stuck in the IP address of a router, there are several ways you can find it .
Manual and Device Control
First, check if the router’s handbook and / or router are present in your hand, referring to a local IP address. Routers typically detail the IP address in the guide, and some routers have a useful information card with the default SSID name and IP address of the unit itself. If you find an address in any of these, you can use the address to access your router’s settings.
Checking the IP Address with IPConfig
In this case, you do not have to worry! There are many ways to find information without any documentation available. If you are currently connected to the router you want to learn IP, you can find the address from the command line. To access the command line, click the Start button and type cmdve then click on “Command Prompt”. Type the sentence displayed on the console: ipconfig
When you press Enter, a lot of information will be shown. Do not think of remembering all this! You are looking for the “Default Gateway” IP address that will be your router’s IP address. This is : “default gateway” is defined as a device that takes your computer to a network. In the case of this case, your router.
Checking the IP Address with Adapter Settings
You can also check the IP address of your router with the adapter settings. First, make sure you are connected to the correct router. Then, right-click the Internet connection status icon on the taskbar and click “Open Network and Sharing Center”. You may need to click the small up arrow to the left of the symbols to see the Internet status icon. On the screen that appears, find the “Connections” field and find where your current Internet connection is listed. On the next screen, click the “Details …” button.
Control the IP Address with the search engine
If you know the model of your router, you can search online to find the IP address. Typically, all routers of the same model use the same local IP address. To look up your router’s IP address, write as much information about the router as you can in a search engine. If you find a model name, this will be very helpful. Then, at the end add “ip address” and press Enter. Check the results of people who ask the same question you have.